LG STUDIO LSSE3029BD Bedienungshandbuch PDF herunterladen (Seite 18)

INSTALLATION

Engaging the Anti-tip Device

•

Move the range close enough to the opening to

plug into the receptacle.

•

Slide the range into position ensuring that the back

leg slides under the anti-tip bracket. The range

should sit flush against the back wall when properly

installed.

•

Carefully attempt to tip the range forward to ensure

that the anti-tip bracket is engaged properly. If

properly installed, the anti-tip bracket will prevent

the range from being tipped. If the range can be

tipped, reinstall the range until the anti-tip bracket is

properly installed and the range will not tip forward.

•

Turn on electrical power. Check the range for

proper operation.

Optional Rear Filler

If the counter does not bridge the opening at the rear

wall the rear filler kit, that is provided with the slide in

range, will be needed.

NOTE

If the countertop depth is greater than 25" there

will be a gap between the filler kit and the back

wall.

If the countertop depth is less than 24", the control

panel will not sit flush with the countertop.

Installing the Rear Filler

Using a screwdriver, remove the upper four

screws that attach the rear bracket and loosen

the lower two screws.

Place the rear filler on the rear bracket.

Tighten the two lower screws on the rear

bracket. Insert one of the screws removed in

step 1 in the slot at each end of the rear filler.

Store the remaining two screws with these

instructions for future use.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Keine Kommentare

LG STUDIO LSSE3029BD Bedienungshandbuch Seite 18